Flameproof Temperature and Humidity Transmitter with Display – FTX-3000-TH
FTX-3000-TH - Flameproof Temperature and Humidity Transmitter with Display.
Technical Specifications :
| Parameter | Description |
|---|---|
| Input | T + RH Sensor Either Hygroclip XD or HTS-220 in SS enclosure |
| Temperature Range | -40.0 to 60.0oC (Using Hygroclip XD Sensor) |
| 0.0 to 60.0 oC (Using HTS-220 sensor) | |
| Temperature Accuracy | Better than +/- 0.3 ?C |
| %RH Range | 0.0 to 100.0 %RH (Using Hygroclip XD Sensor) |
| 10.0 to 100.0%RH (Using HTS-220 sensor) | |
| RH Accuracy | Better than +/-1 %RH @ 25.0 ?C (using Hygroclip-XD sensor) |
| Better than +/-3 %RH @ 25.0 ?C (using HTS-220 sensor) | |
| Display | Dual row of 4 digit 0.5 red/green seven segment LED. |
| Power Supply | 24VDC +/- 10% @ 150mA |
| Current Output 1 | 4-20mA/0-10V proportional and software linearized to the specified range of the Temperature input. (12 bit resolution) - 2 wire |
| Current Output 2 | 4-20mA/0-10V proportional and software linearized to the specified range of the RH input. (12 bit resolution) - 2 wire |
| Digital Serial Output | Isolated 2 wire RS485 on MODBUS RTU protocol in SLAVE mode |
| Isolation | Input, 4-20mA and RS485 outputs are isolated from the DC Power supply. Isolation voltage > 1.5KV DC (3 way isolation technique). |
| Loop Supply | 18-24VDC for 4-20mA input from loop powered transmitter. |
| Loop Resistance | RLmax = 400 Ohms - for each output. |
| Cable Entry | Through suitable size gland for supply and input/output. |
| Enclosure | (IP-65 ) Aluminum Die cast housing Flame proof Enclosure |
| (refer enclosure data sheet given below) | |
| Dimensions | 250 h x 150 w x 70 d mm. |